It’s official. Australia is about to experience a ‘Super El Niño’ summer. This spring, cities across the country are already experiencing record temperatures and increasingly unpredictable weather. Melbourne is certainly no exception to the rule.
With summer just a number of weeks away, now is the perfect time to get your evaporative cooling prepared and ready for the warmer weather. In this article, we’re going to explain how. Read on for everything you need to know!
Is Evaporative Cooling a Good Option?
Although split systems and ducted cooling continue to be very popular, evaporative cooling is still one of the best ways to stay comfortable in summer.
Evaporative cooling is a natural alternative that uses water evaporation and fresh airflow to cool the air inside your property. As noted in an article by Choice, “evaporative coolers are most effective in hot, dry climates with low humidity.” Therefore, they tend to work quite well in a city like Melbourne, especially when compared to notoriously humid hotspots like Sydney or Brisbane.
How to Get Ready for the Summer
A little preparation now can save you plenty of hassle once the temperature starts climbing. So, before summer arrives, we’d recommend following all of these steps.
DIY Maintenance
There are a few things you can check yourself before the weather heats up, but only for accessible portable units. For roof-mounted ducted units, you should always leave physical inspections and filter pad cleaning to licensed professionals due to the roof safety risks
Here’s what you can do if the unit is portable or easily accessible. Start by looking at the cooling pads and filters for dirt, dust, mineral build-up or signs of wear. Give the accessible parts of the unit a clean and make sure nothing is blocking the airflow.
It’s worth switching the cooler on for a test run, too. Check that the air is flowing properly, listen for unusual noises and look for any obvious leaks. If something doesn’t seem right, get it looked at before you really need it.
Setup and Placement
Evaporative cooling relies on fresh outside air, so airflow around the cooler is important. Ducted units are generally installed on the roof and draw outdoor air into the home through the ductwork. Portable units work in much the same way, although their cooling is limited to the room they’re being used in.
Don’t block the air intake or outlet, and remember that evaporative cooling needs some fresh-air movement through the house to work properly. Closing every window and door can actually work against the way these systems are designed to operate.
Arranging a Service
A professional service goes a lot further than the basic cleaning you can do yourself. A technician can inspect the cooling pads, water pump, water distribution, fan, electrical components and other parts that aren’t always easy to check.
It’s also a good chance to find small faults before they turn into a breakdown. Getting the job done before the first run of really hot days can save you from trying to find a technician when everyone else is calling for help.
Investing in a New System
If your cooler is getting old, struggling to keep up or regularly needing repairs, replacement may be worth considering. Newer systems can provide better efficiency and cooling performance, along with more convenient controls.
Depending on the model, newer evaporative coolers can also come with Wi-Fi, Bluetooth and smart controls, giving you more ways to adjust the cooling from your phone. Established Australian brands such as Bonaire, Brivis and Breezair also have a range of evaporative cooling systems to suit different homes.
A new system is a fairly big investment, so have your property assessed before choosing one. The right size, ductwork and system type all affect how well it will perform.
The Benefits of an Evaporative Cooling Service
A proper service isn’t simply about giving the unit a quick clean before summer. It gives a technician the opportunity to look over the system as a whole and pick up problems that may otherwise become apparent on the hottest day of the year.
System Performance
An evaporative cooler can gradually lose performance without completely stopping. You might notice weaker airflow, rooms that aren’t cooling as effectively or a system that seems to take longer to make a difference.
During a service, a technician can inspect the components responsible for airflow and cooling, clean parts where required and identify anything that isn’t working as it should.
Need to get your air con checked out? We’re available to take a look at your evaporative cooling in Camberwell, Northcote, St Kilda, and Melbourne wide. Contact us now to get a free quote!
Longevity
Regular maintenance can help keep the various components of your evaporative cooler in better working order.
Water can leave mineral deposits behind, while cooling pads, pumps and other parts can become worn over time. Finding these issues early gives you a chance to deal with them before they cause further problems.
Less Breakdowns
The last thing you want is your cooler to fail in the middle of a scorching hot 35-degree day.
Unfortunately, that’s also when HVAC technicians tend to be at their busiest. A fault that might have been relatively straightforward to address before summer can become much more frustrating once temperatures soar and everyone is calling for repairs.
A pre-summer service won’t guarantee that nothing will go wrong, but it gives you a better chance of catching worn or faulty components before they’re put under heavy demand.

Expert Insight
A technician who works with evaporative cooling systems regularly can spot problems that aren’t always obvious to a homeowner. They can assess the condition of the unit, identify developing faults and explain what needs attention.
That advice becomes particularly useful with an older system. If you’ve started spending more on repairs, a technician can help you work out whether repairing the existing unit still makes sense or if replacement is worth considering.
Peace of Mind
There’s something to be said for switching the cooler on during the first really hot day of summer and knowing you’ve already had it checked.
Instead of wondering whether the pump will hold up or that strange noise is going to turn into a major fault, you’ll have a much clearer idea of how the system is performing. For something you’ll rely on throughout summer, that’s reassuring.
Heat Cool Express: Your Local Evaporative Cooling Team in Melbourne
We started Heat Cool Express because we saw too many customers dealing with rushed repairs, unclear pricing, and short-term fixes. Our focus is on honest advice, transparent pricing, and quality workmanship that solves the real issue properly.
Our technicians are fully insured, certified, and available 24/7 for same-day service across Melbourne. Whether it’s gas ducted heating, evaporative cooling, split systems, hydronic heating, gas log fires, air conditioning, or hot water systems, we’re here to keep your home or business comfortable all year round.
We offer a 15% discount for pensioners on service charge, so remember to mention when you contact us!
We also accept all major forms of credits cards

Contact us for a free quote on new installations or the replacement of old units. For all other heating, cooling or hot water system needs, simply call 0455 669 462 or send us an email.
Author Bio: Matthew Mesiti, Heat Cool Express Founder and Owner
Matthew Mesiti is the founder, and owner-operator of Heat Cool Express. Matthew has twenty years in the trade, and knows the various ins and outs of modern heating and cooling systems. He services suburbs across Melbourne, from Werribee and Sunbury all the way to Mickleham and Frankston.
Matthew and the Heat Cool Express team repair, service, and replace units from major brands, including Brivis, Braemar, Bonaire, Breezair, Coolbreeze, Coolair, Celair, Bosch, SIME, Heat & Glo, Rinnai, Daikin, Fujitsu, Panasonic, Samsung, and more.
Credentials: ARC Authorisation Number AU066589